Gravity setting screen

Slide the gravity attribute icon displayed in the center to set the direction and strength of gravity.
If set to the center, it will be zero gravity, the more you set it to the outside, the stronger the gravity will be.

Cancel button

Cancel the gravity setting and close the setting screen.

Set button

Apply setting and close the window.

Display Range

Slide the four corners to set the range.
When you play, the area within the square will be displayed.

Trace remaining amount bar

The remaining amount of the trajectory that can be drawn is displayed.

Trajectory drawing screen

Set a trajectory by drawing a line for the items that you want to move. The trajectory which had already been created will appear in a light color, while the trajectory currently being created will appear in a strong color.

Cancel button

Cancel the movement setting and close the setting screen.

Set button

Apply setting and close the window.

Ghost setting screen

Slide the item image displayed in the center and set the direction and strength for the launching of the ghost. The faster you want your ghost to move, the further you need to set it to the outside of the circle.

Cancel button

Cancel the ghost setting and close the setting screen.

Set button

Apply setting and close the window.

Sound list screen

The sounds in the work are displayed as a list. Select the sound you want to add to the selected item.
A check is attached to the already selected sound. Uncheck this if you want to cancel.

Sound submenu

The Trash button and the Copy button are displayed by tapping (or sliding to the left).

Record button

Open the recording screen and add a new sound.

Create sound effect button

Open the sound effect creation screen and create a new sound.

Submenu

Tap (or upward slide) to display import and Trash button.

Cancel button

Cancel the sound setting and close the setting screen.

Set button

Apply setting and close the window.

My work tab

Display works in "My work." Show the list of embedded sounds by tapping the work thumbnail.

Downloaded work tab

Display downloaded work and material stock.

Sound list

Select the sound(s) you want to import. You can select several sound at once.

Cancel button

Cancel the sound import and close the import sound selection screen.

Accept button

Import all the selected sounds and close the import sound selection screen. The imported sound is added to the sound list.

Microphone button

Tap to start recording. (Recording is possible for up to 10 seconds.) To stop manually during recording, tap the stop button.

Cancel button

Cancel sound creation (recording) and close the setting screen.

Sound shape

The recorded sound is displayed as a waveform.
You can adjust the range of the sound you want to play by sliding the frame.

Grid

By moving the playback button up, down, left, and right, you can adjust the pitch (vertical direction) and speed (horizontal direction) of the sound.

Volume slider

Adjust the volume of the recorded sound.

Cancel button

Cancel sound editing and close the setting screen.

Re-record button

Re-recording starts.

Complete button

Save the created sound and close the screen.

Finger tool

Add/Delete/Move a point or line.

Move tool

Move a point or line.

Pen tool

Add a point.

Eraser tool

Delete a point.

Undo/Redo button

By tapping the button, you can Undo (cancel your last action). By swiping it right, you can Redo (restore the action you've undone). Up to 10 actions can be retained.

Random

Create a sound effect automatically by randomly changing the parameter on the main panel.

Main panel

Panel for creating sound effects. Adding/moving points on the 4 element windows to edit the sound effect.

Point

Line

Pitch

Change the pitch of the sound by moving the point/line vertically.

Strength

Change the strength of the sound.

Overtone

Change the overtone frequency. No effect when it is set to 0.

Overtone gain

Change the gain of the overtone effect.

Sound type button

Select between three types of sound ( soft, sharp, and noise).

Time delay dial

Adjust the delay time of the echo effect.

Delay strength dial

Adjust the strength of the echo effect. The effect is off when you set the dial to the left limit.

Distortion dial

Distort the sound to adjust its intensity. The effect is off when you set the dial to the left limit.

Speed dial

Adjust the length of the sound effect.

Volume slider

Change the volume of the sound effect.

Preview

Sound effect visuallisation window.

Play button

Play the sound effect.

Close Button

End the session and close the main panel.

Complete Button

Finalise the sound effect and close the window.

Custom force setting screen

Move the item within the circle to set the strength and direction for the force. At the tool parameter, the strength of the force will be equal to [Force (Up / Down, Left / Right)].

Cancel button

Cancel the custom force setting and close the window.

Set button

Apply setting and close the window.

Scene list screen

The scenes in the work are displayed as a list.
Select the scene you want to set as the destination.
Uncheck this if you want to cancel.

Cancel button

Cancel the scene change setting and close the setting screen.

Set button

Apply setting and close the window.

Flag setting

Each of the nine flags can be set. Tap to switch the state.

Set up the flag

When the flag is down, set up it.

Down the flag

When the flag is set up, down it.

Switch the flag

Switch to set up/ down the flag.

Cancel button

Cancel the flag setting, and close the screen.

Set button

Apply setting and close the window.

Work Flag list

Select the work flag from the list, and generate an event according to the flag state.

Relationship setting screen

Select the target item. You can select multiple target items. Item can be moved during the process of relationship setting, without affecting the initial position. (If you move items so that they are easy to select, such as when items overlap each other, they return to their original positions after setting up.)

Relationship display (self)

The icon of the selected attribute is displayed in the center.

Relationship display (target item)

The selected items are connected by a line.

Zoom button

Zoom the work being edited. Each time you tap, you can change zoom factor.

Cancel button

Cancel the relationship setting (change) and close the setting screen.

Clear button

Clear all relationships set for the selected item.

Set button

Apply setting and close the window.

Debug Mode Start button

Slide the play button to display.

Debug Work Flag list

Work flag state is displayed.
Editing: Tap to temporarily switch the state.
Work Playing: View the current state.